Design your own metallic foil heat transfer vinyl - 1 sheet of 25*20 cm

You can upload the following file formats:

• JPG
• PSD
• PNG with a transparent background

We recommend uploading images that are as large as possible, preferably at least 1500 x 1500 pixels, to achieve the best result. Files uploaded at a lower resolution or size will reduce the quality of the final result.

You should not scale down your image to the desired dimensions; we will take care of that. It is important that the image you upload is as large as possible to achieve a good result. 

Images with white text or white elements will not be visible because the design is printed on white vinyl. We recommend adding an outline around white elements so they are visible against the white background. 

The image you upload will correspond exactly to the finished product. 
If you need changes to your uploaded image, you must select assistance with artwork preparation.

Line thicknesses below 1 mm do not reproduce well in the print and should not be expected to appear.

IMPORTANT Do not upload screenshots unless you want the screenshot itself to be used. We create the design from the uploaded file, so if you upload a screenshot, your entire screenshot will be used as the design.

The size of your iron-on transfer

Please state the size of your design. For smaller designs, we will fill the sheet with as many as possible.  You can provide the width, height or both, but do not enter only "20" without stating whether this refers to the height or width.

The sheet is A4 size, but margins and cutting lines require a little space. As always, you will receive a layout that corresponds exactly to the finished result.